This will only fit the Cab Chassis 2wd and 4wd

The Load Assist Kit comes with:

• 2 x BOSS Extreme Series Double Bellow Airbags
• 4 x brackets (2 upper & 2 lower)
• Mounting Hardware
• Quality SAE J844 Airline
• Dual Schrader Valves
• Stainless Mounting Panel and self tapping screws
• Instructions for fitting

Boss Extreme series airbags are rated at 2600lb or 1136kg per side and have been independently tested to over 600psi.

Average dual cab truck will run around 5-45psi depending on load.

Every BOSS airbag is manufactured with our own unique equipment using Natural Rubber, Hi-tensile steel and Ballistic woven reinforcing, then cured with high pressure and high temperature.

BOSS load assist kits are easy to fit and most simply bolt on using basic hand tools. When filled with air, raise the rear end to make the vehicle level again.

Boss has been manufacturing in the air suspension industry for decades and has tens of thousands of vehicles with our kits installed in some of the toughest conditions in the world, from the harsh outback of Australia to the freezing temperatures of Canada, proven over time with 4WD enthusiasts, Mining companies, Tradies, 4WD Tour Operators as well as in Agricultural Vehicles, Trailers and motorhomes.

To get the best performance from your kit inflate airbags just enough to achieve a level ride height. By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unnecessary pressure on any one individual part of your vehicles suspension.

No drill bolt up kit unlike others that require cutting bump stop from chassis.

The Load Assist Kit comes with:

• 2 x BOSS Extreme Series Double Bellow Airbags
• 4 x brackets (2 upper & 2 lower)
• Mounting Hardware
• Quality SAE J844 Airline
• Dual Schrader Valves
• Stainless Mounting Panel and self tapping screws
• Instructions for fitting

Boss Extreme series airbags are rated at 2600lb or 1136kg per side and have been independently tested to over 600psi.

Average dual cab truck will run around 5-45psi depending on load.

Every BOSS airbag is manufactured with our own unique equipment using Natural Rubber, Hi-tensile steel and Ballistic woven reinforcing, then cured with high pressure and high temperature.

BOSS load assist kits are easy to fit and most simply bolt on using basic hand tools. When filled with air, raise the rear end to make the vehicle level again.

Boss has been manufacturing in the air suspension industry for decades and has tens of thousands of vehicles with our kits installed in some of the toughest conditions in the world, from the harsh outback of Australia to the freezing temperatures of Canada, proven over time with 4WD enthusiasts, Mining companies, Tradies, 4WD Tour Operators as well as in Agricultural Vehicles, Trailers and motorhomes.

To get the best performance from your kit inflate airbags just enough to achieve a level ride height. By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unnecessary pressure on any one individual part of your vehicles suspension.

The Load Assist Kit comes with:

• 2 x BOSS Extreme Series Double Bellow Airbags
• 4 x brackets (2 upper & 2 lower)
• Mounting Hardware
• Quality SAE J844 Airline
• Dual Schrader Valves
• Stainless Mounting Panel and self tapping screws
• Instructions for fitting

Boss Extreme series airbags are rated at 2600lb or 1136kg per side and have been independently tested to over 600psi.

Average dual cab truck will run around 5-45psi depending on load.

Every BOSS airbag is manufactured with our own unique equipment using Natural Rubber, Hi-tensile steel and Ballistic woven reinforcing, then cured with high pressure and high temperature.

BOSS load assist kits are easy to fit and most simply bolt on using basic hand tools. When filled with air, raise the rear end to make the vehicle level again.

Boss has been manufacturing in the air suspension industry for decades and has tens of thousands of vehicles with our kits installed in some of the toughest conditions in the world, from the harsh outback of Australia to the freezing temperatures of Canada, proven over time with 4WD enthusiasts, Mining companies, Tradies, 4WD Tour Operators as well as in Agricultural Vehicles, Trailers and motorhomes.

To get the best performance from your kit inflate airbags just enough to achieve a level ride height. By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unnecessary pressure on any one individual part of your vehicles suspension.

No drill bolt up kit unlike others that require cutting bump stop from chassis.

• 2 x BOSS Extreme Series Double Bellow Airbags
• 4 x brackets (2 upper & 2 lower)
• Mounting Hardware
• Quality SAE J844 Airline
• Dual Schrader Valves
• Stainless Mounting Panel and self tapping screws
• Instructions for fitting

Boss Extreme series airbags are rated at 2600lb or 1136kg per side and have been independently tested to over 600psi.

Average dual cab truck will run around 5-45psi depending on load.

Every BOSS airbag is manufactured with our own unique equipment using Natural Rubber, Hi-tensile steel and Ballistic woven reinforcing, then cured with high pressure and high temperature.

BOSS load assist kits are easy to fit and most simply bolt on using basic hand tools. When filled with air, raise the rear end to make the vehicle level again.

Boss has been manufacturing in the air suspension industry for decades and has tens of thousands of vehicles with our kits installed in some of the toughest conditions in the world, from the harsh outback of Australia to the freezing temperatures of Canada, proven over time with 4WD enthusiasts, Mining companies, Tradies, 4WD Tour Operators as well as in Agricultural Vehicles, Trailers and motorhomes.

To get the best performance from your kit inflate airbags just enough to achieve a level ride height. By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unnecessary pressure on any one individual part of your vehicles suspension.

The Load Assist Kit comes with:

• 2 x BOSS Extreme Series 2600 Double Bellow Airbags
• 4 x brackets (2 upper & 2 lower)
• Mounting Hardware
• Quality SAE J844 Government Approved Airline
• Dual Schrader Valves Mounted in Stainless Panel
• Instructions for fitting

Boss Extreme series airbags are rated at 2600lb or 1186kg per side and have been tested to over 750psi.

All Boss airbags are manufactured by us and are branded Boss. Beware of unbranded airbags, usually coming from China from other companies.

Average dual cab ute will run around 15-45psi depending on load.

Boss has sold over 13000 load assist kits in Australia, proven over time with 4WD enthusiasts, Mining companies, Tradies, 4WD Tour Operators as well as in Agricultural Vehicles, Trailers and motorhomes, limited only to your imagination.

To get the best performance from your kit inflate airbags just enough to achieve a level ride height. By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unnecessary pressure on any one individual part of your vehicles suspension.

The Load Assist Kit comes with:

• 2 x BOSS Extreme Series 2600 Double Bellow Airbags
• 4 x brackets (2 upper & 2 lower)
• Mounting Hardware
• Quality SAE J844 Government Approved Airline
• Dual Schrader Valves Mounted in Stainless Panel
• Instructions for fitting

Boss Extreme series airbags are rated at 2600lb or 1186kg per side and have been government approved tested to over 750psi.

All Boss airbags are manufactured by us and are branded Boss. Beware of unbranded airbags, usually coming from China from other companies.

Average dual cab ute will run around 15-45psi depending on load.

Boss has sold over 13000 load assist kits in Australia, proven over time with 4WD enthusiasts, Mining companies, Tradies, 4WD Tour Operators as well as in Agricultural Vehicles, Trailers and motorhomes, limited only to your imagination.

To get the best performance from your kit inflate airbags just enough to achieve a level ride height. By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unecessary pressure on any one individual part of your vehicles suspension.

The Load Assist Kit comes with:

• 2 x BOSS Extreme Series Double Bellow Airbags
• 4 x brackets (2 upper & 2 lower)
• Mounting Hardware
• Quality SAE J844 Airline
• Dual Schrader Valves
• Stainless Mounting Panel and self tapping screws
• Instructions for fitting

Boss Extreme series airbags are rated at 2600lb or 1136kg per side and have been independently tested to over 600psi.

Average dual cab truck will run around 5-45psi depending on load.

Every BOSS airbag is manufactured with our own unique equipment using Natural Rubber, Hi-tensile steel and Ballistic woven reinforcing, then cured with high pressure and high temperature.

BOSS load assist kits are easy to fit and most simply bolt on using basic hand tools. When filled with air, raise the rear end to make the vehicle level again.

Boss has been manufacturing in the air suspension industry for decades and has tens of thousands of vehicles with our kits installed in some of the toughest conditions in the world, from the harsh outback of Australia to the freezing temperatures of Canada, proven over time with 4WD enthusiasts, Mining companies, Tradies, 4WD Tour Operators as well as in Agricultural Vehicles, Trailers and motorhomes.

To get the best performance from your kit inflate airbags just enough to achieve a level ride height. By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unnecessary pressure on any one individual part of your vehicles suspension.