Shop Air Suspension Parts | Boss Air Suspension

12 Volt Air Compressor 100% Duty PX06

Boss Air — Tue, 29 Apr 2025 00:21:10 +0000

12v 100% duty cycle ideal for air suspension use.
Oil less compressor can be mounted vertical or horizontal for easy installation

PX-06 Compressor
Duty Cycle 100%@100psi
Max working pressure 200psi
1.8cfm
Amp draw Max 23amps
Check Valve
Braided Hose
IP 56 Rated

Mounting sizes are
85mm centres wide and 225mm centres long

The post 12 Volt Air Compressor 100% Duty PX06 first appeared on Boss Air Suspension.

12 Volt Small Air Compressor PX03

Boss Air — Tue, 29 Apr 2025 00:10:52 +0000

12volt compressor 1.5cfm free flow 33% duty cycle, recommended working pressure 0-150psi – max pressure 200psi 3/8npt port head, built in air filter, Crankcase fed design, max amp draw 16amps start up under load – oil free design, quite running.

Includes:

PX03 Compressor
Teflon Coated braided hose
Check valve

12 Volt Small Air Compressor PX03

Boss Air Suspension

Auto Pressure Rear Airbag Controller with PX06 Compressor

Boss Air — Tue, 11 Feb 2025 03:07:21 +0000

Take Control of Your Air Suspension with Ease!

The In-Cab Rear Air Suspension Controller is the perfect solution for maintaining a level ride, no matter how your load changes.
When paired with our PX-06 air compressor, this advanced controller lets you add or remove air from your air bag load assist kit
with precision and convenience—all from the comfort of your cab.

Why Choose This Air Suspension Controller?

Seamless Installation: With just three wires and simple push-fit fittings, setup is quick and hassle-free.
Customizable Ride Heights: Set and save up to 3 preset pressure heights for optimized performance.
Complete Control: Use the LCD wired remote or wireless key fob for independent control of each corner and overall adjustments.
Built for Convenience:
- Auto-programmed height adjustment with ignition ON/OFF.
- Integrated fuses for a clean and safe wiring harness.
- Real-time air pressure display on the remote.
Flexible Compatibility: Activating the compressor automatically via the ECU.

What’s Included?

2-corner air suspension valve block with built-in ECU and pressure sensors
PX-06 12 volt Compressor with 600mm Braided line with Check Valve(1.8 CFM,100% Duty Cycle)
LCD wired remote control
Wireless key fob remote for versatile control
Heavy-duty relay and wiring loom
Easy-to-follow installation instructions
6 x 1/4″ push-fit fittings for the valve block
Inline water trap
5M 1/4″ Red Air brake line
Fittings to connect to our Boss Air bag Load assist kits

Upgrade your air suspension system today with this intuitive and reliable Compressor & controller—designed to handle the load and keep your vehicle level with ease!

The post Auto Pressure Rear Airbag Controller with PX06 Compressor first appeared on Boss Air Suspension.

Auto Pressure Rear Airbag Controller with PX01 Compressor

Boss Air — Tue, 11 Feb 2025 02:40:10 +0000

Take Control of Your Air Suspension with Ease!

The In-Cab Rear Air Suspension Controller is the perfect solution for maintaining a level ride, no matter how your load changes.
When paired with our PX-01 air compressor, this advanced controller lets you add or remove air from your air bag load assist kit
with precision and convenience—all from the comfort of your cab.

Why Choose This Air Suspension Controller?

Seamless Installation: With just three wires and simple push-fit fittings, setup is quick and hassle-free.
Customizable Ride Heights: Set and save up to 3 preset pressure heights for optimized performance.
Complete Control: Use the LCD wired remote or wireless key fob for independent control of each corner and overall adjustments.
Built for Convenience:
- Auto-programmed height adjustment with ignition ON/OFF.
- Integrated fuses for a clean and safe wiring harness.
- Real-time air pressure display on the remote.
Flexible Compatibility: Activating the compressor automatically via the ECU.

What’s Included?

2-corner air suspension valve block with built-in ECU and pressure sensors
PX-01 Compressor 12v
LCD wired remote control
Wireless key fob remote for versatile control
Heavy-duty relay and wiring loom
Easy-to-follow installation instructions
6 x 1/4″ push-fit fittings for the valve block
Inline water trap
5M 1/4″ Red Air brake line
Fittings to connect to our Boss Air bag Load assist kits

Upgrade your air suspension system today with this intuitive and reliable Compressor & controller—designed to handle the load and keep your vehicle level with ease!

The post Auto Pressure Rear Airbag Controller with PX01 Compressor first appeared on Boss Air Suspension.

Auto Pressure Rear Airbag Controller with PX06 and Tank

Boss Air — Tue, 11 Feb 2025 01:05:02 +0000

Take Control of Your Air Suspension with Ease!
The In-Cab Rear Air Suspension Controller is the perfect solution for maintaining a level ride, no matter how your load changes.
When paired with our PX-06 100% Duty Cycle Air compressor and 9 Litre Tank plus Water Trap, this advanced controller lets you add or remove air from your air bag load assist kit
with precision and convenience—all from the comfort of your cab.

Why Choose This Air Suspension Controller?

Seamless Installation: With just three wires and simple push-fit fittings, setup is quick and hassle-free.
Customisable Ride Heights: Set and save up to 3 preset pressure heights for optimized performance.
Complete Control: Use the LCD wired remote or wireless key fob for independent control of each corner and overall adjustments.
Built for Convenience:
- Auto-programmed height adjustment with ignition ON/OFF.
- Integrated fuses for a clean and safe wiring harness.
- Real-time air pressure display on the remote for both Airbags and the Air tank pressure.
Flexible Compatibility: Activating the compressor automatically via the ECU.

What’s Included?

2-corner valve block with built-in ECU and pressure sensors
PX-06 12volt Air Compressor with 600mm Braided line with Check Valve(1.8 CFM,100% Duty Cycle)
Aluminum air tank 5 port 3 Gallon (aprox 9 litres)Tank Size is L450mm x H220mm x W180mm
LCD wired remote control
Wireless key fob remote for versatile control
Heavy-duty relay and wiring loom
Easy-to-follow installation instructions
All push-fit fittings for the valve block and T fiitings etc
Inline water trap
Fittings to connect to our Boss Air bag Load assist kits

Upgrade your air suspension system today with this intuitive and reliable controller—designed to handle the load and keep your vehicle level with ease!

The post Auto Pressure Rear Airbag Controller with PX06 and Tank first appeared on Boss Air Suspension.

Airbag Controller for Rear Air Suspension

Boss Air — Wed, 23 Oct 2024 02:09:23 +0000

The Air Suspension Rear Controller consists of a 4 port valve block with inbuilt pressure senders.

Wired remote control with 2 corner control as well as 3 Preset Pressure Heights, Wireless remote for independent control of up and down.

Key features of this Air Suspension Controller Are.

Easy Install with 3 wires, 1 airline in and 2 Out.
3 adjustable Preset Ride Heights.
All Fuses inbuilt into wiring harness.
Easily connect to a compressor only (system will activate compressor on/ off by the ECU)
Or easily connect to a compressor/ Tank System.
Tank Pressure reading if coupled with a tank.
Auto programable preset height with ignition.
Auto programable preset deflate for ignition off.8 Channel Remote Control for Air Suspension Management

The system comes with:

2 Corner Valve block encorporating ECU
Wired Remote Control
Key Fob Remote Control
Heavy Duty Relay
Wiring Loom
Install Instructions

The post Airbag Controller for Rear Air Suspension first appeared on Boss Air Suspension.

Air Suspension 8 Channel Remote Control

Boss Admin — Mon, 05 Aug 2024 22:37:29 +0000

8 Channel Remote Control for Air Suspension Management

Boss Air Suspension 4 Channel wireless remote control with 2 x remotes makes it easy to level your ride wirelessly.

8 Channel Remote Receiver
2 x Remote Controls with bracket
Wiring Loom
Install Instructions

The post Air Suspension 8 Channel Remote Control first appeared on Boss Air Suspension.

Ford Ranger T6.2 2022+ Rear Air Suspension

Boss Admin — Wed, 24 Jul 2024 00:43:13 +0000

Here we have our rear airbag kit for the Ford Ranger T6.2 2022+

The Load Assist Kit comes with:

2 x BOSS Extreme Series Double Bellow Airbags
4 x brackets (2 upper & 2 lower)
Mounting Hardware
Quality SAE J844 Airline
Dual Schrader Valves
Stainless Mounting Panel and self tapping screws
Instructions for fitting

Boss Extreme series airbags are rated at 2500lb or 1136kg per side and have been independently tested to over 600psi.

Average dual cab truck will run around 5-45psi depending on load.

Every BOSS airbag is manufactured with our own unique equipment using Natural Rubber, Hi-tensile steel and Ballistic woven reinforcing, then cured with high pressure and high temperature.

BOSS load assist kits are easy to fit and most simply bolt on using basic hand tools. When filled with air, raise the rear end to make the vehicle level again.

Boss has been manufacturing in the air suspension industry for decades and has tens of thousands of vehicles with our kits installed in some of the toughest conditions in the world, from the harsh outback of Australia to the freezing temperatures of Canada, proven over time with 4WD enthusiasts, Mining companies, Tradies, 4WD Tour Operators as well as in Agricultural Vehicles, Trailers and motorhomes.

To get the best performance from your kit inflate airbags just enough to achieve a level ride height. By doing this you are also allowing all of the suspension components to share the extra load of the vehicle and not putting any unnecessary pressure on any one individual part of your vehicles suspension.

The post Ford Ranger T6.2 2022+ Rear Air Suspension first appeared on Boss Air Suspension.

Air Gauge 200psi Dual Needle Air Ride with fittings

Boss Air — Fri, 01 Mar 2024 20:40:00 +0000

Dual Needle Air Suspension Gauge with 1/4″ tube push fittings.

Boss Air Suspension Dual Air pressure Gauge is ideal for all air ride suspension systems with twin needles, 1/4″npt threads for push connect fittings.
Featuring two separate needles that allow you to monitor your vehicle’s changing suspension conditions from 0 to 200psi. Our Air Ride Suspension gauge is essentially designed for anyone who has air brakes, air bags, an air horn or similar systems in their car or truck.

Red and Green Needles
12volt DC backlit light
Twin Needle
200psi max pressure
2 x 1/4″ tube Push Fittings
Mounting Hardware
Chrome Trim Ring
Japanese Made Quality

The post Air Gauge 200psi Dual Needle Air Ride with fittings first appeared on Boss Air Suspension.

Air Suspension Air Bellows 4500 Bare

Boss Air — Mon, 19 Feb 2024 00:44:07 +0000

Boss #4500 Airbag

Large 230mm diameter and upto 350mm height.

Ideal for larger applications requiring a heavy lift such as airbag trailers.
Includes:

#4500 Extreme Series Air Bellows

Fully compressed – 90mm with 8mm ends fitted
Max diameter – 230mm (widest when fully compressed)
Max height- 350mm
Max working pressure 0-160 psi
Test pressure – 480psi

The post Air Suspension Air Bellows 4500 Bare first appeared on Boss Air Suspension.